OSTEOTOMY SIZER PIN GUIDE SIZE 41

OSTEOTOMY SIZER PIN GUIDE SIZE 41
AETOS Shoulder System - HOS-0990-805-02

A manual surgical device designed to simultaneously place, angle, and guide a rotating surgical drill on hard tissue (e.g., bone); some types are also intended for guiding bone-coring instruments (e.g., keel punch). It is designed in a tubular form or with guiding holes and may have serrations at its distal end to enable firm placement on hard tissue surfaces (it is not bored into the tissue); it can have a handle or be held by another device (e.g., orthopaedic jig), and typically allows protection of the surrounding soft tissue during surgery. It is typically made of metal and may have graduations along its length; it is not custom-made for a specific patient. This is a reusable device.

No Data Available

No Data Available

Device Sterile: False

Sterilization Prior To Use: True

Sterilization Methods:

• Moist Heat or Steam Sterilization

Code: HSD

Device Name: Prosthesis, Shoulder, Hemi-, Humeral, Metallic Uncemented

Device Class: 2

Physical State: N/A

Definition: N/A

Submission Type ID: 1

Review Panel: OR

Review Code: N/A

Technical Method: N

Gmp Exempt Flag: N/A

Life Sustain Support Flag: N

Unclassified Reason: N/A

Implant Flag: Y

Target Area: N/A

Regulation Number: 888.3690

Third Party Flag: N

Medical Specialty: OR

Code: KWT

Device Name: Prosthesis, Shoulder, Non-Constrained, Metal/Polymer Cemented

Device Class: 2

Physical State: N/A

Definition: N/A

Submission Type ID: 1

Review Panel: OR

Review Code: N/A

Technical Method: N

Gmp Exempt Flag: N/A

Life Sustain Support Flag: N

Unclassified Reason: N/A

Implant Flag: Y

Target Area: N/A

Regulation Number: 888.3650

Third Party Flag: N

Medical Specialty: OR

Code: PHX

Device Name: Shoulder Prosthesis, Reverse Configuration

Device Class: 2

Physical State: Typically includes humeral stem, humeral socket, humeral cup, glenosphere, and glenoid baseplate with fixation screws. The humeral stem and humeral socket may be one single piece or two separate pieces locked together. The humeral cup is snap fit into the humeral socket. The humeral cup is made from UHMWPE and articulates with the glenosphere made of CoCrMo alloy, Titanium alloy, or stainless steel. The glenosphere locks to glenoid baseplate which is fixed to the glenoid bone by 2-6 screws. The glenoid baseplate has HA coating, metallic coating or no coating and may feature a central peg, central screw, central cage, or keel.

Definition: Intended to be used to relieve pain and to replace the glenoid and humeral side of the shoulder joint in order to restore mobility in a grossly rotator cuff deficient joint with severe arthropathy or a previous joint replacement with a grossly rotator cuff deficient joint.

Submission Type ID: 1

Review Panel: OR

Review Code: N/A

Technical Method: N

Gmp Exempt Flag: Relative to the native shoulder joint, the device moves the center of rotation medially and distally to the anatomic position which increases the length of the deltoid muscle's lever arm, allowing the same rotational moment with less applied force.

Life Sustain Support Flag: N

Unclassified Reason: N/A

Implant Flag: Y

Target Area: Shoulder joint

Regulation Number: 888.3660

Third Party Flag: N

Medical Specialty: OR

Code: KWS

Device Name: Prosthesis, Shoulder, Semi-Constrained, Metal/Polymer Cemented

Device Class: 2

Physical State: N/A

Definition: N/A

Submission Type ID: 1

Review Panel: OR

Review Code: N/A

Technical Method: N

Gmp Exempt Flag: N/A

Life Sustain Support Flag: N

Unclassified Reason: N/A

Implant Flag: Y

Target Area: N/A

Regulation Number: 888.3660

Third Party Flag: N

Medical Specialty: OR

Device Id: 00885556811191

Device Type: Primary

DeviceId Issuing Agency: GS1

Contains DI Number: N/A

Package Quantity: N/A

Package Discontinue Date: N/A

Package Status: N/A

Package Type: N/A